News and Information


The Teflon heater design is effective, features low air resistance, ensures uniform heating, and has no high- or ultra-low-temperature dead zones.

2022/12/05

The duct-type Teflon heater is primarily designed to heat gases flowing through air ducts. It comes in three specifications: ultra-low temperature, atmospheric pressure, and continuous high-temperature versions. From a structural standpoint, these heaters share a common feature: they use thick steel plates to support the heating elements, thereby reducing vibrations induced in the heating tubes after the centrifugal fan starts or stops. Each junction box is equipped with an overheat protection control system.

Precautions for Using Teflon Heaters

2022/11/28

The heater prevents the motor from becoming damp and cold, ensuring its normal operation. The motor can only operate normally when the grounding resistance is sufficiently high. Additionally, when the temperature is slightly low, the Teflon heater can also prevent the motor from starting up too cold.

Plate-type Teflon heater manufacturer: Heater functions

2022/11/25

Plate-type Teflon heater manufacturer: Heater function. The function of the heater is to draw steam—steam that has already done some work in the turbine—into the heater, where it heats the feedwater, raising its temperature. This reduces the amount of steam discharged from the turbine to the condenser, thereby minimizing cold-source losses and improving the thermal system’s cycle efficiency.

Plate-type Teflon heater manufacturer: Motor heater functions

2022/11/21

Plate-type Teflon heater manufacturer: Motor heater functions A motor heater can prevent the motor from becoming damp, ensuring its normal operation. The motor can function properly only when the insulation resistance is sufficiently high. Additionally, when the temperature is too low, the motor heater can also prevent the motor from starting up too cold.

Plate-type Teflon heater manufacturer: Structure of duct heaters

2022/11/18

Plate-type Teflon heater manufacturer: Structure of duct heaters Duct heaters are primarily used to heat the air flowing through ventilation ducts. They come in three performance types: low-temperature, medium-temperature, and high-temperature. From a structural perspective, their common feature is that they use electric heating tubes supported by steel plates, which helps reduce vibrations on the heating tubes caused by fan shutdown. All junction boxes are equipped with overtemperature protection devices. Currently, the commonly used low-temperature and medium-temperature models have been widely adopted in various types of air conditioners. The low-temperature model can be directly installed inside the duct, while the medium-temperature model can also be installed. As for the high-temperature model, its structure varies; between the outer wall of the duct and the heater’s junction box, there is a layer of thick...

Electroplating Pollutant Emission Standards

2022/05/30

This standard has been formulated to implement the “Environmental Protection Law of the People’s Republic of China,” the “Water Pollution Prevention and Control Law of the People’s Republic of China,” the “Air Pollution Prevention and Control Law of the People’s Republic of China,” the “Marine Environmental Protection Law of the People’s Republic of China,” the “Decision of the State Council on Implementing the Scientific Outlook on Development and Strengthening Environmental Protection,” as well as other relevant laws, regulations, and the “Opinions of the State Council on Preparing the National Functional Zone Planning,” with the aim of protecting the environment, preventing and controlling pollution, and promoting advancements in electroplating production processes and pollution control technologies. This standard specifies the emission limits for water pollutants and air pollutants generated by electroplating enterprises and enterprises possessing electroplating facilities. This standard...